AB-COM AB IPBox 55HD User Manual - page 32

32 

Manual configuration of DiSEqC 1.2 motor 

(Menu – Setup – Service Searching – Positioner setup) 

This setting is used only for DiSEqC motors without USALS system. 

Service searching 

(Menu – Setup – Service Searching – Default services lists) 

This menu enables installation of basic (default) setting for basic satellites (Astra 28,2E, Astra 

19,2E, Astra 23,5E and HotBird 13E) – same way like during initial configuration. 

Warning! 

Actual setting in your receiver will be removed during Default setting installation! 

If you need setting for more satellites you can install it as a plugin: 

Plugins 

(Menu – Plugins – Download Plugins) 

Press GREEN function button „Download 

Plugins“. 

Wait until downloading catalogue of plugins 

from the Internet. 

Select Settings item and press OK.

Tuner is set for DiSEqC 1,2 , USALS is 

turned off and satellites to be aimed with 

motor are selected. 

„Tune“ – press Red function button to 

display menu for entering satellite and TP to 

be searched. Press OK for return to setup 

menu.  

You have to set up corresponding 

transponder for every satellite and save its 

position number.  

Positioner movement – use color function 

buttons (according to description) to control 

movement of the motor. Press the button 

once to start movement, press it for the 

second time to stop the movement.. 

Positioner fine movement  steb by steb 

movement. Try to reach maximum value of 

SNR parameter. 

Positioner storage – press Green function 

button to save the position. 

Set limits – Setting up the east and west