1. DL manuals
  2. Abatron
  3. Recording Equipment
  4. BDI3000
  5. User Manual

Abatron BDI3000 User Manual

Other manuals for BDI3000: User Manual
Manual is about: bdiAccess system . JTAG interface

Summary of BDI3000

  • Page 1

    Bdi access jtag interface library xscale user manual manual version 1.00 for bdi3000 ©1992-2007 by abatron ag.

  • Page 2

    Bdi access jtag interface library, bdi3000 (xscale) installation manual 2 © copyright 1992-2007 by abatron ag v 1.00 1 introduction ................................................................................................................................. 3 1.1 bdi3000............................

  • Page 3

    Bdi access jtag interface library, bdi3000 (xscale) installation manual 3 © copyright 1992-2007 by abatron ag v 1.00 1 introduction the bdiaccess library can be used to access bdi3000 functions. With this library, a windows/unix program can take advantage of the bdm/jtag debug interface of the conne...

  • Page 4

    Bdi access jtag interface library, bdi3000 (xscale) installation manual 4 © copyright 1992-2007 by abatron ag v 1.00 2 installation 2.1 connecting the bdi3000 to target the enclosed target cable is designed for the intel recommended 20pin jtag connector. In case where the target system has an approp...

  • Page 5

    Bdi access jtag interface library, bdi3000 (xscale) installation manual 5 © copyright 1992-2007 by abatron ag v 1.00 bdi target a connector signals note: the bdi actively drives trst. It does not require any special power-up circuitry. Simply, the require- ment is that trst is weakly pulled down at ...

  • Page 6

    Bdi access jtag interface library, bdi3000 (xscale) installation manual 6 © copyright 1992-2007 by abatron ag v 1.00 2.2 connecting the bdi3000 to power supply the bdi3000 needs to be supplied with the enclosed power supply from abatron (5vdc). Before use, check if the mains voltage is in accordance...

  • Page 7

    Bdi access jtag interface library, bdi3000 (xscale) installation manual 7 © copyright 1992-2007 by abatron ag v 1.00 2.3 status led «mode» the built in led indicates the following bdi states: mode led bdi states off the bdi is ready for use, the firmware is already loaded. On the output voltage from ...

  • Page 8

    Bdi access jtag interface library, bdi3000 (xscale) installation manual 8 © copyright 1992-2007 by abatron ag v 1.00 2.4 connecting the bdi3000 to host 2.4.1 serial line communication the host is connected to the bdi through the serial interface (com1...Com4). The communication cable (included) betw...

  • Page 9

    Bdi access jtag interface library, bdi3000 (xscale) installation manual 9 © copyright 1992-2007 by abatron ag v 1.00 2.4.2 ethernet communication the bdi3000 has a built-in 10/100 base-t ethernet interface (see figure below). Connect an utp (unshielded twisted pair) cable to the bd3000. Contact your ...

  • Page 10

    Bdi access jtag interface library, bdi3000 (xscale) installation manual 10 © copyright 1992-2007 by abatron ag v 1.00 2.5 installation of the bdiaccess software on the enclosed cd you will find the bdiaccess library, the bdi configuration software and the firm- ware required for the bdi. Copy the app...

  • Page 11

    Bdi access jtag interface library, bdi3000 (xscale) installation manual 11 © copyright 1992-2007 by abatron ag v 1.00 2.6 bdi3000 setup/update first make sure that the bdi is properly connected to the host via rs232 and/or network. To avoid data line conflicts, the bdi3000 must be disconnected from t...

  • Page 12

    Bdi access jtag interface library, bdi3000 (xscale) installation manual 12 © copyright 1992-2007 by abatron ag v 1.00 current press this button to read back the current loaded bdi3000 firmware ver- sion. The current firmware version will be displayed. Erase press this button to erase the current loade...

  • Page 13

    Bdi access jtag interface library, bdi3000 (xscale) installation manual 13 © copyright 1992-2007 by abatron ag v 1.00 2.6.2 linux/unix hosts in order to update the firmware / logic of the bdi and to set the network parameters, a setup tool is included for linux/unix hosts. In the zip archive bdisetup...

  • Page 14

    Bdi access jtag interface library, bdi3000 (xscale) installation manual 14 © copyright 1992-2007 by abatron ag v 1.00 3 specifications operating voltage limiting 5 vdc ± 0.25 v power supply current typ. 500 ma max. 1000 ma rs232 interface: baud rates 9’600,19’200, 38’400, 57’600,115’200 data bits 8 p...

  • Page 15

    Bdi access jtag interface library, bdi3000 (xscale) installation manual 15 © copyright 1992-2007 by abatron ag v 1.00 4 environmental notice disposal of the equipment must be carried out at a designated disposal site. 5 declaration of conformity (ce).

  • Page 16

    Bdi access jtag interface library, bdi3000 (xscale) installation manual 16 © copyright 1992-2007 by abatron ag v 1.00 6 warranty abatron switzerland warrants the physical cd, cable and bdi3000 to be free of defects in materi- als and workmanship for a period of 3 years following the date of purchase...

  • Page 17: Appendices

    Bdi access jtag interface library, bdi3000 (xscale) installation manual 17 © copyright 1992-2007 by abatron ag v 1.00 appendices a troubleshooting problem the firmware can not be loaded. Possible reasons • the bdi is not correctly connected with the host (see chapter 2). • a wrong communication port ...

  • Page 18

    Bdi access jtag interface library, bdi3000 (xscale) installation manual 18 © copyright 1992-2007 by abatron ag v 1.00 b maintenance the bdi needs no special maintenance. Clean the housing with a mild detergent only. Solvents such as gasoline may damage it. C trademarks all trademarks are property of...