- DL manuals
- Abatron
- Recording Equipment
- BDI3000
- User Manual
Abatron BDI3000 User Manual - page 18
bdi
Access
JTAG interface library, BDI3000 (XScale)
Installation Manual
18
© Copyright 1992-2007 by ABATRON AG
V 1.00
B Maintenance
The BDI needs no special maintenance. Clean the housing with a mild detergent only. Solvents such
as gasoline may damage it.
C Trademarks
All trademarks are property of their respective holders.
Summary of BDI3000
Page 1
Bdi access jtag interface library xscale user manual manual version 1.00 for bdi3000 ©1992-2007 by abatron ag.
Page 2
Bdi access jtag interface library, bdi3000 (xscale) installation manual 2 © copyright 1992-2007 by abatron ag v 1.00 1 introduction ................................................................................................................................. 3 1.1 bdi3000............................
Page 3
Bdi access jtag interface library, bdi3000 (xscale) installation manual 3 © copyright 1992-2007 by abatron ag v 1.00 1 introduction the bdiaccess library can be used to access bdi3000 functions. With this library, a windows/unix program can take advantage of the bdm/jtag debug interface of the conne...
Page 4
Bdi access jtag interface library, bdi3000 (xscale) installation manual 4 © copyright 1992-2007 by abatron ag v 1.00 2 installation 2.1 connecting the bdi3000 to target the enclosed target cable is designed for the intel recommended 20pin jtag connector. In case where the target system has an approp...
Page 5
Bdi access jtag interface library, bdi3000 (xscale) installation manual 5 © copyright 1992-2007 by abatron ag v 1.00 bdi target a connector signals note: the bdi actively drives trst. It does not require any special power-up circuitry. Simply, the require- ment is that trst is weakly pulled down at ...
Page 6
Bdi access jtag interface library, bdi3000 (xscale) installation manual 6 © copyright 1992-2007 by abatron ag v 1.00 2.2 connecting the bdi3000 to power supply the bdi3000 needs to be supplied with the enclosed power supply from abatron (5vdc). Before use, check if the mains voltage is in accordance...
Page 7
Bdi access jtag interface library, bdi3000 (xscale) installation manual 7 © copyright 1992-2007 by abatron ag v 1.00 2.3 status led «mode» the built in led indicates the following bdi states: mode led bdi states off the bdi is ready for use, the firmware is already loaded. On the output voltage from ...
Page 8
Bdi access jtag interface library, bdi3000 (xscale) installation manual 8 © copyright 1992-2007 by abatron ag v 1.00 2.4 connecting the bdi3000 to host 2.4.1 serial line communication the host is connected to the bdi through the serial interface (com1...Com4). The communication cable (included) betw...
Page 9
Bdi access jtag interface library, bdi3000 (xscale) installation manual 9 © copyright 1992-2007 by abatron ag v 1.00 2.4.2 ethernet communication the bdi3000 has a built-in 10/100 base-t ethernet interface (see figure below). Connect an utp (unshielded twisted pair) cable to the bd3000. Contact your ...
Page 10
Bdi access jtag interface library, bdi3000 (xscale) installation manual 10 © copyright 1992-2007 by abatron ag v 1.00 2.5 installation of the bdiaccess software on the enclosed cd you will find the bdiaccess library, the bdi configuration software and the firm- ware required for the bdi. Copy the app...
Page 11
Bdi access jtag interface library, bdi3000 (xscale) installation manual 11 © copyright 1992-2007 by abatron ag v 1.00 2.6 bdi3000 setup/update first make sure that the bdi is properly connected to the host via rs232 and/or network. To avoid data line conflicts, the bdi3000 must be disconnected from t...
Page 12
Bdi access jtag interface library, bdi3000 (xscale) installation manual 12 © copyright 1992-2007 by abatron ag v 1.00 current press this button to read back the current loaded bdi3000 firmware ver- sion. The current firmware version will be displayed. Erase press this button to erase the current loade...
Page 13
Bdi access jtag interface library, bdi3000 (xscale) installation manual 13 © copyright 1992-2007 by abatron ag v 1.00 2.6.2 linux/unix hosts in order to update the firmware / logic of the bdi and to set the network parameters, a setup tool is included for linux/unix hosts. In the zip archive bdisetup...
Page 14
Bdi access jtag interface library, bdi3000 (xscale) installation manual 14 © copyright 1992-2007 by abatron ag v 1.00 3 specifications operating voltage limiting 5 vdc ± 0.25 v power supply current typ. 500 ma max. 1000 ma rs232 interface: baud rates 9’600,19’200, 38’400, 57’600,115’200 data bits 8 p...
Page 15
Bdi access jtag interface library, bdi3000 (xscale) installation manual 15 © copyright 1992-2007 by abatron ag v 1.00 4 environmental notice disposal of the equipment must be carried out at a designated disposal site. 5 declaration of conformity (ce).
Page 16
Bdi access jtag interface library, bdi3000 (xscale) installation manual 16 © copyright 1992-2007 by abatron ag v 1.00 6 warranty abatron switzerland warrants the physical cd, cable and bdi3000 to be free of defects in materi- als and workmanship for a period of 3 years following the date of purchase...
Page 17: Appendices
Bdi access jtag interface library, bdi3000 (xscale) installation manual 17 © copyright 1992-2007 by abatron ag v 1.00 appendices a troubleshooting problem the firmware can not be loaded. Possible reasons • the bdi is not correctly connected with the host (see chapter 2). • a wrong communication port ...
Page 18
Bdi access jtag interface library, bdi3000 (xscale) installation manual 18 © copyright 1992-2007 by abatron ag v 1.00 b maintenance the bdi needs no special maintenance. Clean the housing with a mild detergent only. Solvents such as gasoline may damage it. C trademarks all trademarks are property of...