ABB PSTX210 Service Manual - page 17
1SFC13105M0201 | Service Manual |
Service PSTX210...370
17
3
3 Service PSTX210...370
3.1 Introduction
3.1.1 Earth the Softstarter
18
3.1.2 How to access service parameters
18
3.2 Configuring the HMI
3.2.1 Update Firmware
19
3.2.2 Set the ID
19
3.2.3 Reset to factory defaults
20
3.3 Change the HMI, Disconnect/Connect the main power cables and
the control cables
3.3.1 Change the HMI
22
3.3.2 Place the new HMI
22
3.3.3 Disconnect the main power cables and the control cables
23
3.3.4 Connect the main power cables and the control cables
24
3.4 Service of the PCBA
3.4.1 Change the PCBA
26
3.5 Change the Fans, Bypass contactor and Current transformers
3.5.1 Change the fans
30
3.5.2 Change the Bypass contactor
31
3.5.3 Change the Current transformers
33
3.6 Change the SCR
3.6.1 Change the SCR
36
3.7 Instructions for testing the SCR
3.7.1 Test the SCR
41