ABB PSTX210 Service Manual - page 19
1SFC13105M0201 | Service Manual |
Service PSTX210...370
19
3.2
Configuring the HMI
This chapter describes how update firmware, set the ID
and how to reset the Softstarter to default.
3.2.1
Update Firmware
Firmware needs to be updated when changing the HMI.
Please contact your ABB sales office for information.
See Figure 1.
3.2.2
Set the ID
The ID of the Softstarter has to be changed when the
PCBA has been changed and after updating firmware.
Choose between 210…370 due to type of Softstarter.
1.
Switch on the power supply (terminal 1 and 2).
2.
1
Push
”Menu” to reach Menu.
Use
or
to navigate to
Parameters
and then
push
”Select”.
3.
2
Use
or
to navigate to
Complete list
and then push
”Select”.
4.
3
Use
or
to navigate to
28
Service
and
then push
”Select”.
5.
4
Use
or
to navigate to
28.01
ID
and then
push
”Edit”.
6.
5
Use
,
to set
28.01
ID
to
105
and then push
”Save”.
1
3.2.2_3
1
2
3
4
5
3