Ability Research AbilitySpeaker User Manual And Instructions - Speaker
Location and Mounting of the AbilitySpeaker and Pillow
Speaker
The pillow speaker should be located conveniently for the user to hear quitely played
prompts. It should be mounted (using velcro™ or a similar product) to the back of the
enclosure rather than using the cord to suspend it. It should be located so as to avoid
being bumped by the user, headgear, supports, etc.
The AbilitySpeaker enclosure should be located so that listeners can hear the messages
well when played.
Both speakers and the ActionVoice should be located to avoid tangled or strained
cords. Cords etc should be located to avoid pulling one of the speakers or the
ActionVoice off the tray or table when the user or others move. The idea is to keep
them out of the way as much as possible.
Excess cord length should be taped out of the way to avoid tangling etc.
Velcro or dual-lock can be used to secure the enclosures or the ActionVoice in place.
APPENDIX A. AbilitySpeaker Specifications*
Built-in Speaker
8 ohm
Pillow speaker
8 ohm with built-in volume control
Compatibility
ActionVoice model ACTV-2A only
Size
3.8" x 2.4" x 1.1"
8
APPENDICES