Abt 2 BEAMS Installation Manual - page 6
5
Min
Max
Green LED light up shows transmitting
Transmitting
In anti-fog state
Transmitter and receiver are not in same frequency
State LED on,alarm LED on
State LED off,alarm LED off
Beams are blocked,alarm state
State LED off,alarm LED on
State LED on,alarm LED off
Normal state
. Beam response time adjustment
Please see the diagram to
adjust t he response time of
the receiver. Usually, the
time set shall be less than
the time when the intruder
crosses the guarding area.
High speed:1 (6.9m/s) Fast running:2(4m/s)
Fast walking(1.2m/s):3 Normal walking(0.7m/s):4 Slow walking(0.4m/s):5
.Physical test
Walking test is required after the setting, physical test in accordance to below diagram.
Transmitter
Receiver
State
Signal