Abus WIRELESS ALARM SYSTEM User Manual - page 6
5-6
Chapter 4 Creating a new client
To make changes to your ABUS wireless alarm system, you first have to create a new client. Select the Clients dropdown menu. You
can now change the information on the Client information page.
After creating a new client, you can program it. You can program the client offline (i.e., you are not connected to the client) or online
(i.e., you are connected to the client by a modem or USB.
Chapter 5 Connecting to the client
There are two ways of connecting to the client:
•
By modem
•
By a direct USB link
Before connecting, make the connection settings. You change these settings in the Options dropdown menu.
Select New client.
Enter a serial
number under Client
Number.
Enter a name.
Enter a telephone
number.
Enter a U/D
telephone number.
This number is
dialled if you make a
remote call by
modem.
Enter the city, the
state and the ZIP
code.
Enter a comment.
After entering data,
select Save client.
You can now print
the input data under
Print client.
Select System
configuration.
Select Print options
to change the printer
settings.
Select Interface
Language to
change the software
language.
Select Direct COM Port for a
direct USB connection. This is
usually port 2 or 3. For more
information, see the Hardware
Manager of your PC.
Select Remote COM Port
(modem) for a modem
connection. This is usually
port 1. For more
information, see the
Hardware Manager of your
PC.
Select Remote for a modem connection.
Select Local for a USB connection.