ABYSSOUND ASP-1000 User Manual - page 7
P a g e
6
•
Do not place ASP-1000 on unstable or tilted surfaces.
•
ASP-1000 should be used with an AC voltage with the
properties according to the nameplate on the back. ASP-1000 is
made for the voltage of the country to which it has been
shipped. Plugging in to a different voltage results in the loss of
warranty. In this case the product may be dangerous and there
is a risk of damage.
•
Make sure that ASP-1000 is powered from fully operational socket equipped with a
grounding prong. If you are not certain that the socket you want to plug ASP-1000 to
is equipped with a grounding prong, contact a qualified electrician.
•
If the fuse blows you should replace it with a fuse of THE SAME TYPE and THE
SAME PARAMETERS as the one used by the manufacturer.
•
Always disconnect ASP-1000 during a storm or when idle for prolonged time
periods (during a prolonged absence e.g. vacations).
•
The power cord must be arranged in a way that does not allow other objects to
crush or chafe it. Arrange it in a way allowing safe passing by.
•
Do not let any metallic object get inside ASP-1000.
•
Avoid using the ASP-1000 in extremely high or low temperatures.
•
All cleaning activities should be carried out with lint free microfiber cloths. Do not
use water or solvent-based solutions.
PACKAGE CONTENTS
The package contains:
ASP-1000 Preamplifier: 1pc.
Remote control: 1pc.
Warranty card: 1pc.
Manual: 1 pc.
Power cord: 1 pc.
WARNING:
Pay close attention while unpacking ASP-1000. Save the original
packaging for future transportation needs.
IMPORTANT:
Pay attention to the packaging. Check if there are any signs of dents or
puncture.