Acano Solution Installation Manual - page 14
Network Configuration
Acano solution: Installation Guide 76-1002-04-D
Page 14
ii. Issue the following command in the command line management shell on the CA
server replacing the path and CSR name with your information:
certreq -submit -attrib "CertificateTemplate:WebServer"
C:\Users\Administrator\Desktop\certcsr.pem
iii. After entering the command, a CA selection list is displayed similar to that below.
Select the correct CA and click OK.
iv. Do one of the following:
If your Windows account has permissions to issue certificates, you are prompted
to save the resulting certificate, for example as webserver.pem. Go on to the
step 3 below.
If you do not see a prompt to issue the resulting certificate, but instead see a
message on the command prompt window that the 'Certificate request is
pending: taken under submission', then follow the steps in
Appendix D
before
going on to step 3 below.
CAUTION: If you are using a CA with the Web Enrolment feature installed, you may
copy the CSR text including the BEGIN CERTIFICATE REQUEST and END
CERTIFICATE REQUEST lines to submit. After the certificate has been issued, copy
only the certificate and not the Certificate Chain. Be sure to include all text including
the BEGIN CERTIFICATE and END CERTIFICATE lines and paste into a text file.
b. Alternatively for quick testing and debugging, self-signed certificates can be generated
(
http://en.wikipedia.org/wiki/Self-signed_certificate
).
pki selfsigned
where
e.g. "pki selfsigned webserver" creates webserver.key and webserver.crt (which is self-
signed).
31. Transfer both the the certificate and key files (e.g. webserver.crt and webserver.key) to the
MMP of the Acano Server using SFTP.