Accessory Power Gogroove Sona wave3 User Manual

Summary of Gogroove Sona wave3

  • Page 1

    Your easy-to-use reference for getting the most out of your product enjoy user guide free registration.

  • Page 4: What’S In The Box

    What’s in the box thank you for purchasing the gogroove™ sonawave ³ loaded with two, room-fi lling, side-fi ring drivers and a rechargeable battery, this uniquely styled speaker is ready to play anywhere. The versatile audio inputs allows you to play music from almost any audio source including sd c...

  • Page 5: Product Diagram

    Product diagram 1- power switch 2- power led indicator 3- volume knob 4- back button 5- play / pause button 6- next button 7- usb fl ash drive port 8- aux line-in port 9- dc5v power port 10- sd/mmc card port 11- charging led indicator 12- battery compartment 1 11 7 8 9 10 3 4 5 6 12 2.

  • Page 6: Quick Start

    Quick start 1- unpack all the contents of this box. 2- insert the (b) rechargeable battery into the (12) battery compartment. 3- connect the (d) usb power cable to the (9) dc5v power port on the side of sonawave³. 4- connect the other end of the (d) usb power cable to the (e) ac power adapter. 5- in...

  • Page 7

    Usb power cable this power option is most useful when using with your laptop or desktop computer. Plug the (d) usb power cable into the (9) dc5v power port. Plug the other end of the (d) usb power cable into a usb port on your computer. When plugged in the (11) charging led indicator will illuminate...

  • Page 8

    Playing music: the sonawave³ can play music from 3 diff erent sources - aux line-in, sd card and usb fl ash drive. Using aux line-in the aux line-in port is suitable for using the sonawave³ to play music from your laptop, smartphone, mp3 player or other music device that has a headphone port. Make s...

  • Page 9: Troubleshooting

    Insert the sd memory card or usb fl ash drive into the appropriate port on the side of sonawave³. Do not plug in an sd card and usb fl ash drive at the same time, as the sonawave³ will only recognize one media source at a time. Make sure the sonawave³ is powered on and that the (c) 3.5mm audio cable...

  • Page 10: Troubleshooting Continued

    The volume is too low. A. Please make sure to adjust volume on your audio device controls as well as on the sonawave³. To adjust volume on the sonawave³, turn the (3) volume knob towards the “+” or “-“. B. Please make sure that when using the (8) aux- line-in port, the cable is properly connected to...

  • Page 11: Product Specifi Cations

    Product specifi cations - please only use this product in the manner described in this manual - please keep out of the reach of children - do not expose the unit to dust, water, or extreme temperatures - do not attempt to disassemble the product cautions speaker: (3w x 2) drivers, 6w rms – 12w peak ...

  • Page 12: Troubleshooting

    Troubleshooting © 2012 accessory power all trademarks and brand names are the property of their owners. ® for more on the sonawave³ + tips and tricks please visit accessorypower.Com/videos.