Accessory Power Gogroove Sona wave3 User Manual - Quick Start
Quick Start
1- Unpack all the contents of this box.
2- Insert the (b) Rechargeable battery into the (12) Battery compartment.
3- Connect the (d) USB power cable to the (9) DC5v power port on the side of SonaWAVE³.
4- Connect the other end of the (d) USB power cable to the (e) AC power adapter.
5- Insert the (e) AC power adapter into an AC wall outlet.
6- Slide the (1) Power switch to the left and you will see the (2) Power LED indicator glow
blue.
7- The SonaWAVE³ is now receiving power and also charging the (b) Rechargeable
battery.
8- Connect your audio device using the included (c) 3.5mm audio cable or by docking
an SD / SDHC memory card or fl ash drive that is loaded with MP3 fi les.
9- Press the (5) Play / Pause button and the music will begin to play.
Operating Instructions
Connecting the GOgroove SonaWAVE³ to power:
The SonaWAVE³ can be powered by the (d) USB power cable, (e) AC power adapter and
by its (b) Rechargeable battery.
Rechargeable Battery
Before use, please insert the (b) Rechargeable battery into the (12) Battery
compartment. Be sure to align the battery contacts with the contacts inside the (12)
Battery compartment. Whenever the SonaWAVE³ is connected to a power source,
the (b) Rechargeable battery will charge. It takes 1-2 hours to reach a full charge by
AC or USB. Run-time is 3-5 hours at medium volume.
3.5mm audio cable