Accessory Power Gogroove Sona wave3 User Manual - Troubleshooting
Insert the SD memory card or USB fl ash drive into the appropriate port on the side
of SonaWAVE³. Do not plug in an SD card and USB fl ash drive at the same time,
as the SonaWAVE³ will only recognize one media source at a time. Make sure the
SonaWAVE³ is powered ON and that the (c) 3.5mm audio cable is NOT plugged
in to the (8) AUX line-in port. Press the (5) Play / Pause button and you will hear the
music play. To navigate between songs, press the (6) Next button or (4) Back button
accordingly.
To adjust volume, turn the (3) Volume knob towards the “+” or “-“ . Adjust the sound
until it is suitable.
Operating Instructions continued
The SonaWAVE³ will not turn ON and the LED power indicator is not glowing.
a. Please make sure that the battery contacts are aligned the with the contacts inside
the (12) Battery compartment.
b. Please make sure that SonaWAVE³ is properly connected to power. If using AC or
USB power, please make sure that a proper connection is being made. Also, please
make sure that the AC wall outlet or USB port you are connected to, has power
running to it.
c. If using battery power, please make sure that it has been suffi
ciently charged. 1-2
hours charging will fully charge the battery.
The music from my SD memory card or USB fl ash drive is not playing.
a. Please make sure there is only one media source inserted and that the (c) 3.5mm
audio cable is NOT plugged in to the (8) AUX line-in port.
b. Please make sure that the fi les are in MP3 format and that they have not been
placed in a folder. Files should be in the top-most directory of your SD memory card
or fl ash drive.
c. Please check your card by connecting it to a computer to make sure that the data
has been successfully transferred and formatted.