Accu-Chek ACTIVE Instructions For Use Manual - page 74

74

Checking your meter

6 

Check that this code number is the same as the 

code number on the label of the test strip con-

tainer.

If the numbers do not match, even though the code 

chip in the meter belongs to the test strip container, 

please contact your customer support and service 

centre.

Following the code number, the test strip symbol and 

the flashing blood drop symbol appear in the display. 

Now you have approx. 90 seconds to apply control 

solution to the test strip. After this time, the meter 

turns itself off.