AccuBANKER AB7500 User Manual - 6- Periodic Maintenance
12
6- Periodic Maintenance
Follow the recommendations below to minimize possible errors during
the operation of the unit and extend the life of the unit.
6.1 Daily Maintenance
Proceed with the following routine each day after unit’s final use
a. Turn OFF the unit.
b. At the end of each work session use a cloth to remove dust and dirt
accumulated during the day.
c. With the brush, remove the dust accumulated in in the exposed
optical sensors
6.2 Weekly Maintenance
Proceed with the following routine each week
a. Turn OFF the unit.
b. Open the unit’s top cover.
c. Use a brush and a compressed air can to remove dust and debris
from the inside of the unit as well as the rollers and transport
mechanisms.
d. Use a clean cloth moistened with alcohol to properly clean the
CIS sensors as well as the rollers.
Note
: Be sure to proceed carefully with cleaning routine to avoid any
damage to the unit, especially to the CIS sensors.