AccuBANKER AB7500 User Manual - page 8

8

20-21- PORT L RATE / PORT R RATE

Configures the communication speed of the serial port (9600 / 19200

38400 / 115200). 

PRINTER: Data bits: 8 / Stop bits: 1 /  Parity: None

TERMINAL (PC) :  Data bits: 7 / Stop bits:1 / Parity: None

22- CIS SELECT

Activates / Deactivates the CIS sensor in CNT mode (Basic Counting)

23-  SELECT DIGIT

Allows oeprator to select the format in which to separate the digits on the

display or during printing. 

24- EXTERNAL DISPLAY 

Activates / Deactivates external display’s connection. 

25- TIME CHECK

Allows operator to configure unit to the date and time desired. 

26- STACKER FULL

Allows operator to set the maximum capacity of the stacker.

27- ADD MODE (SDC)

During operation in SDC mode, with ADD function active, when there 

is a change of denomination the current count can go to ZERO 

automatically or be controlled by the operator manually.

28- BATCH MODE (MDC)

During operation in MDC mode with ADD function active, when working 

in BATCH mode, the total accumulated value can be set to return to ZERO 

or ADD every time the selected grouping quantity is reached.