AccuBANKER AB7500 User Manual - page 6

6

4- DUAL USER; NOT AVAILABLE

5- AUTO-START

Used to set the unit to MANUAL start mode, or to vary the machine’s

start time after the first notes are detected by the Hopper sensor.

6- REPEAT START

Used in BATCH mode to set the unit in AUTO / MANUAL mode 

during the batching process. 

7- BUZZER

Used to Activate / Deactivate the notification buzzer when working 

with the unit’s keypad.                                                  

8- OFF LCD LIGHT

Enables / Disables the display standby function when the unit is not in 

use for long periods of time. 

9- MODE KEY SWITCH

Activates / Deactivates the MODE key, forcing the operator to work in a 

single working mode.

10- SPEED

Allows to vary the counting speed of the machine between 

800/900/1000 bills / min.

11- REJECT FULL  

To set the maximum amount allowed in the rejection pocket. 

Once this quantity is reached, the unit stops (25/50/75/100).

12- REJECT CHECK

When this function is enabled (ON) the unit automatically stops when 

at least one ticket enters the rejection pocket.