1. DL manuals
  2. AccuLine
  3. Measuring Instruments
  4. 40-6500
  5. Instruction Manual

AccuLine 40-6500 Instruction Manual - 13. Product Registration

Other manuals for 40-6500: Instruction Manual
Manual is about: Manual-Leveling Rotary Laser Level

Summary of 40-6500

  • Page 1

    ©2005 johnson level & tool 1 manual-leveling rotary laser level model nos. 40-6500 and 40-6510 instruction manual congratulations on your choice of this manual-leveling rotary laser level. We suggest you read this instruction manual thoroughly before using the instrument. Save this instruction manua...

  • Page 2: Table of Contents

    2 ©2005 johnson level & tool table of contents 1. Kit contents 2. Features and functions 3. Safety instructions 4. Location/content of warning labels 5. Location of parts/components 6. Operating instructions 7. Using the product 8. Self-check and calibration 9. Technical specifications 10. Applicati...

  • Page 3: 2. Features and Functions

    ©2005 johnson level & tool 3 2. Features and functions • able to emit horizontal laser plane and plumb-up beam at an angle of 90 degrees. • able to emit vertical laser plane and horizontal beam. • able to emit a line perpendicular to rotating plane, to form laser cross line movable by 360 degrees. •...

  • Page 4: Warning!

    4 ©2005 johnson level & tool warning! The tinted goggles are designed to enhance the visibility of the laser beam. They do not offer protection to the eyes from direct exposure of the laser beam. Attention important • read all instructions prior to operating this laser tool. Do not remove any labels...

  • Page 5

    ©2005 johnson level & tool 5 4. Location/content of warning labels 40-6500_6510 english 4/11/05 2:23 pm page 5.

  • Page 6

    6 ©2005 johnson level & tool 5. Location of part/components x-direction level vial plumb-up laser beam output aperture z-direction level vial vertical laser output window gradient adjusting knob x/z-direction leveling knob rotating laser output aperture battery door dc 6v power jack operating panel ...

  • Page 7: 6. Operating Instructions

    ©2005 johnson level & tool 7 6. Operating instructions important: it is the responsibility of the user to verify the calibration of the instrument before each use. Battery installation note: always check to be sure that the on/off switch is in the off position before removing and replacing batteries...

  • Page 8: Note: Make Sure That The

    8 ©2005 johnson level & tool 5. Turn the instrument on, select your desired work- ing status according to the guide from the instruction manual, and then start operation. 6. Please turn off the unit after operations. Note: make sure that the gradient adjusting knob points to 0 scale level vial adjus...

  • Page 9: Slope Scan Instruction

    ©2005 johnson level & tool 9 vertical output status instruction 1. Put four “aa” alkaline batteries into the instrument or power the instrument by connecting dc 6v through power jack. 2. Mount the instrument on platform or a leveling tripod, connecting with tripod by the 5/8" –11 screw thread. 3. Ad...

  • Page 10: Marking Line Instruction

    Slope figure 3 gradient (0-4%) horizontal 10 ©2005 johnson level & tool 3. Regulate the gradient adjusting knob to tilt the level vial in y-direction to desired gradient (0%~4%) (fig. 1). 4. Level the vial by the leveling knob (fig. 2). 5. Select your required working state and start operation (fig....

  • Page 11: 7. Using The Product

    ©2005 johnson level & tool 11 7. Using the product operating panel 1. Power/vertical line switch button 2. Range scan mode button 3. Down key 4. Up key 5. Power lamp 6. Range scan mode indicator lamp power on/off • power on: with the first press of the power button, the rotating laser and plumb-up l...

  • Page 12: Range Scan Mode Key

    12 ©2005 johnson level & tool • vertical line on: with a second press of the power button, the vertical laser is also turned on. • power off: a third press of the power button, turns all of the lasers and power indicator lamps off. Range scan mode key • high speed scan: when initially powered up, th...

  • Page 13: Up/down Key

    ©2005 johnson level & tool 13 up/down key • in high-speed scan mode, pressing the key will increase scan speed. Pressing the key will decrease scan speed. Note: the instrument rotates in highest speed when it is initially powered on. • in range scan mode, pressing the key shifts the scan range count...

  • Page 14: 3. Operation Guide

    14 ©2005 johnson level & tool (b) display 1. Power symbol 2. Low battery symbol 3. Coarse/fine detection symbol 4. Sound symbol 5. Detecting position symbol 3. Operation guide (a) installation of battery • open the battery-box cap and connect the cords inside with the two polarities of the 9v batter...

  • Page 15

    ©2005 johnson level & tool 15 (c) using the clamp holder 1. Clamp bolt 2. M5 screw • position the instrument on the clamp holder by the m5 screw of the clamp holder. • position the clamp holder on tower rod or other types of surveying rods by the clamp bolt of the clamp holder. (d) detection 1. Coar...

  • Page 16

    16 ©2005 johnson level & tool 2. Fine detection 1. Power symbol 2. Fine detection symbol • press coarse/fine detection button. The instrument is ready for fine detection. • move the instrument slightly up and downwards like the coarse detection procedure. • when the instrument displays like fig 6, i...

  • Page 17: Level Vial Self-Check

    ©2005 johnson level & tool 17 (g) detector maintenance • when you are done using the detector, return it to its packing case. • keep the instrument, particularly the detecting window, clean. If unit becomes dusty, use a clean cloth to gently wipe it clean. • avoid knocking the unit over or allowing ...

  • Page 18

    18 ©2005 johnson level & tool 2. Put the instrument under vertical output mode on tripod. 3. First, face the instrument towards wall a, and adjust the leveling knob to center the bubble of z-direction vial. Project laser beam and mark e2 for the red laser point shown on wall a. 4. Measure the distan...

  • Page 20

    20 ©2005 johnson level & tool 10. Application demonstrations plumb reference for ceiling installation reference for anti-static flooring installation reference for window installation reference for baseboard installation reference for hanging pictures reference for dormer installation 40-6500_6510 e...

  • Page 21: 11. Care and Handling

    ©2005 johnson level & tool 21 11. Care and handling • this laser unit is a precision tool that must be handled with care. • avoid exposing unit to shock vibrations and extreme temperatures. • before moving or transporting the unit, make sure that the unit is turned off. • remove the batteries when s...

  • Page 22: 13. Product Registration

    22 ©2005 johnson level & tool note: the user is responsible for the proper use and care of the product. It is the responsibility of the user to verify the calibration of the instrument before each use. For further assistance, or if you experience problems with this product that are not addressed in ...

  • Page 23: 14. Accessories

    ©2005 johnson level & tool 23 14. Accessories acculine pro™ accessories are available for purchase through authorized acculine pro dealers. Use of non-acculine pro accessories will void any applicable limited warranty and there will be no warranty. If you need any assistance in locating any accessor...

  • Page 24

    24 ©2005 johnson level & tool 40-6500_6510 english 4/11/05 2:23 pm page 24.