AccuLine 40-6500 Instruction Manual - Slope Scan Instruction
©2005 Johnson Level & Tool
9
Vertical Output Status Instruction
1. Put four “AA” alkaline batteries
into the instrument or power
the instrument by connecting
DC 6V through power jack.
2. Mount the instrument on platform
or a leveling tripod, connecting with
tripod by the 5/8" –11 screw thread.
3. Adjust leveling-knob to center the
bubble of vial in Z direction.
4. Turn the instrument on, select your
desired working status according to
the guide from the instruction manual, and then start operation.
5. Please turn off the unit after operations.
Slope Scan Instruction
The slope scan function is available when the instrument is in horizontal
output status. The operating
details are shown as follows:
1. Mount the instrument on
platform or a leveling tripod
according to the instruction of
horizontal output status.
2. Aim the Y-axis of the instrument
at the target in desired inclination
direction.
Rotating
Laser Line
Z-Direction
Leveling Knob
Horizontal
Laser Beam
The plane on
Y-axis inclined
against the
horizontal
40-6500_6510 English 4/11/05 2:23 PM Page 9