Accurate Technology ProScale User Manual - Output Modes
ProScale RF Receiver User Manual
Page 10 of 20
Output Modes
There are six output modes available on the ProScale RF receiver. The first
five are ASCII text formats and the sixth mode is a binary data mode that
provides partial message emulation for Accurate Technology’s ProRF™ two-
way radio system. This provides backward compatibility for applications that
were designed using the ProRF system.
Mode
Description
0
Position only
1
Position with units type (MM or IN)
2
Position with display (transmitter) ID
3
Position with units and display ID
4
Full Message Display
5
Binary Mode ProRF emulation
(Use this mode when interfacing with
TigerStop
™)
In the case of output mode 0, an ASCII position is provided followed by the
programmed terminator; carriage return or carriage return and line feed (CR or
CR/LF). In the other text modes, each field is separated by the programmed
delimiting character (
followed by the programmed terminating character.
The following are examples of output modes 0 through 3:
Output mode 0
Position
Example:
inches:
5.637
millimeters
28.35
Output mode 1
Position
Example:
inches with
5.637 IN
millimeters with
28.35 MM
Output mode 2
Position
Example:
inches with
5.637 3
millimeters with
28.35 2