Airbutler Steven User Manual - Airbutler
4
Setting fan:
Choose the suitable fan mode to the right grade of air pollution (QUIET, LOW, MEDIUM,
HIGH or AUTO) by pressing the button FLOW.
Timer:
The timer mode effects that
AIRBUTLER
Steven turns off automatically after the chosen
time. The running time can be selected from 60 minutes to max. 8 hours.
• Push button POWER (1) to activate the unit.
• Push TIMER () until the wished running time appears. Every push extends running
time of 1, or 8 hours. As soon as the timer expires,
AIRBUTLER
Steven turns itself
automatically off.
• Every push on FLOW () switches the fan to the next higher level (circle:
AUTOMATIC, QUIET, LOW, MEDIUM, HIGH). You can see it on the display.
Cleaning/Maintenance:
The indicators „Clean Metal Grid“ and „Replace Filter“ show when it is time to clean
Steven – at least every months is recommended. Turn off and unplug Steven. Put
AIRBUTLER
Steven on a soft tissue and open it like shown on the following graphics.
1. Take down the front cover of the
AIRBUTLER
Steven.
. Take out the Plasma Dust Collector with the front filter. Take off the front filter from
the front side of the Plasma Dust Collector. Take down the Plasma Dust Collector
with the ionisation unit.
. Take out the HEPA-filter carbon coated.
2
3
1