Airbutler Steven User Manual - Take Down The Hepa-Filter
6
.
Take down the HEPA-filter
Take care of front and backside of the filter!
Please pay attention to the front and backside of the filter when you replace it!
Cleaning the individual parts:
1.
Front cover
and cabinet shall be cleaned inside and outside with a wet tissue
(micro fibre).
.
Front filter
shall be cleaned under flowing warm water. If it
is hard to clean all dirt you can pre-soap the filter with a mild
detergent (not containing any kinds of acid or alcohol) and
clean it with a tooth brush.
.
Plasma Dust Collector
(PDC) shall be cleaned under flow-
ing warm water with a mild detergent. Use a sponge or a
toothbrush for cleaning. The PDC (A) can also be cleaned in a
dishwasher. Please wear protective gloves to avoid injuries on your fingers!
4.
Ionisation
unit and ionisation wires shall be cleaned carefully with a wet tissue.
Please beware not to damage any wires while you are cleaning the filter (B).
Otherwise the filter will lose its dust collecting function. Do not use the ioniser
with damaged wires – danger of short-circuit.
1. Pull out the filter at position A.
A
A