[ operation manual ] updated: 15/07/15.
Elements: splitter welcome! Thank you for purchasing elements: splitter. Featuring the sum-to-zero crossovers and mid/side features from our popular multiband series, splitter is a one-of-a-kind band-splitter, band-combiner and multiband stereo utility. Used either as a standalone device or as part ...
Elements: splitter contents loading and saving patches loading and saving patches in splitter is done in the same way as with any other reason device. See “loading patches” and “saving patches” in the reason operation manual for further information. Controls and displays x-overs x-over — sets the cr...
Elements: splitter bands on — toggles the band on or off. This only applies to the low and high bands, as the mid band is always active. If either the high or low bands are turned off, then splitter functions as a dual-band effect. If they are both switched off, it acts as a single-band effect. M (m...
Elements: splitter the lo/mid and mid/high x-overs, and the mid/side, pan and volume parameters for each of the three bands. Audio i/o — the routing in splitter works in one of two different ways: ‣ pre-split mode (active if only the main l/r audio inputs are connected): a conventional band splitter...
