AirSep Focus Portable Manual - page 30
MN170-1 rev A 03/11
26
Problem
Probable Cause
Solution
Unit alarms, does not start in automobile while
connected to a properly functioning DC outlet.
Focus power supply needs resetting.
Turn off unit. Disconnect the DC power supply from
the automobile outlet, restart the automobile, and
then reconnect the DC power supply into the
automobile DC outlet to reset the DC power supply.
Alarm condition,
Audible alarm sounds
and the (Red) alarm light illuminates.
A general malfunction has occurred.
Turn off unit. Change to another source of oxygen as
available, and contact your Equipment Provider.
Solid (Amber) light without audible alarm.
Focus need inspection and / or service.
Contact your Equipment Provider. It is time for your
Focus unit to be inspected and / or serviced by your
Equipment Provider. After any necessary service and
the performance is verified by the Equipment
Provider, the alarm service/indicator light will be
reset.
All other problems.
Turn off unit. Change to another source of oxygen as
available, and contact your Equipment Provider.