Anritsu 701012 User Manual - page 60
Manual is about: Anritsu USB Power Sensor User Guide
of
70
Method 3–Remapping a Serial Port
Serial Port Compatibility
C-4
MA24106A UG
3. Click the + box next to Ports (COM & LPT) to expand the installed ports list.
4. Select the port that is assigned to the power sensor. Disconnect and reconnect the sensor and notice the
new COM port number that appears. The new port is the current port assignment for the power sensor.
5. Right-click on the new port assigned in step 4 above and select Properties from the pop-up menu to
display the properties for that port.
6. Click the Port Settings tab of the properties window.
Figure C-3.
Device Manager