Anritsu 701012 User Manual - page 63

MA24106A UG

D-1

Appendix D — Upgrading the Firmware

D-1 Upgrading the Firmware

The Anritsu Power Meter application provides the necessary software to upgrade the MA24106A power 

sensor’s firmware. The current sensor firmware can be determined from the Help | About menu in the Anritsu 

Power Meter application. To upgrade the firmware, proceed as follows:

1. Download the latest firmware upgrade files from 

http://www.us.anritsu.com

 and save them in a 

recoverable location.

2. Launch the firmware upgrade utility from the Tools menu in the Anritsu Power Meter application and 

follow the on-screen instructions.

3. Disconnect and reconnect the USB cable from the power sensor, and then click OK.

Figure D-1.

Firmware Upgrade Dialog

Note: If this is the first time that you are upgrading the sensor’s firmware, you will need to install the MA24106A

upgrade driver. Follow the driver installation procedure as outlined in Section 2-3, starting with step 9, and

select the MA24106A Upgrade Mode driver when prompted from:

C:\Program Files\Anritsu\AnritsuPowerMeter\UpgradeModeDriver\AnritsuMA24106AUpgradeMode.inf

Figure D-2.

Upgrade Firmware Driver