Antelope 10M Owner's Manual - page 2
SAFETY NOTES
IMPORTANT
To reduce the risk of electrical shocks, fire, and related hazards:
About the 12V DC power supply option, please note the following:
Do not remove screws, cover, or cabinet. There are no user serviceable parts inside.
Refer servicing to qualified service personnel.
Do not expose this device to rain, moisture or spillover of liquid of any kind.
Do not insert foreign objects into the ventilation outlets of the cabinet.
Should any form of liquid or a foreign object enter the device, do not use it. Switch off
the device and then unplug it from the power source. Do not operate the device
again until the foreign object is removed or the liquid has completely dried and its
residues fully cleaned up. If in doubt, please consult the authorized repair service.
Do not handle the power cords with wet hands!
Make sure the device is switched off when plugging/unplugging it to/from the power
source.
When unplugging from the wall outlet always pull the plug, not the power cord.
Make sure ventilation outlets are not obstructed: putting things on the cabinet or
using the device in a narrow and poorly ventilated place may result in the
temperature rising which could affect its operation or the operation of other closely
located components.
If anything goes wrong, turn off the device first and then unplug the power cords. Do
not attempt to repair the device yourself: consult the authorized service personnel or
your dealer.
Improper application of the 12V DC power supply may damage the device. When
connecting the 12V DC power cord to the power source, make sure to comply with
the circuit diagram given in this manual so that the correct polarity is applied. If in
doubt - consult a competent electronics technician.
Make sure the power supply source is capable of producing enough power to meet
the requirements of the device during its peak consumption period (the warm-up)
when 40 Watts of power are required.
1