Antelope 10M Owner's Manual - page 6
6
7
8
Rear Panel
6.
7.
8.
AC Power Connection
DC Power Connection
Atomic Clock Outputs 1-8
WIRING DIAGRAM
This IES AC connection supports inputs of 100-240V AC. This enables the device to
automatically accommodate mains voltages in any country.
Speakon NL4FX socket for 12 V DC power supply. The power source should be capable of
producing enough power to meet the requirements of the device during its peak
consumption period (the warm up), when 40 Watts of power are required. The 12V power
supply units designed for telecommunication devices typically meet this power output
requirement.
BNC outlets for the 10 MHz atomic clock signal. For best results, the cables should not
exceed 6 meters (20 feet) in length. Longer cable runs result in increased jitter and other
clock errors.
Example connection schematics of the ISOCHRONE 10M.
5