Anvil CDA1003 R01 Installation Operation And Care

Summary of CDA1003 R01

  • Page 1

    Multifunction warmer installation operation and care of multifunction warmer model: cda1003 r01 nb: register on-line today register your warranty on-line now at www.Anvilworld.Com no web access if you do not have access to the web. Kindly register by completing the warranty registration form and fax...

  • Page 2

    These instructions must be followed for us to guarantee our full support of your claim for protecting against loss from concealed damage. The form for filing such a claim will be provided by the carrier. Unpacking unpack the product and check for any damage incurred during transit. This should be re...

  • Page 3

    Carving station configuration dry heat bain marie configuration chip dump configuration figure 1 figure 2 figure 3 exploded diagram multifunction warmer cda1003 r01 1 2 3 4 24 6 7 8 9 5 10 11 13 14 14 15 14 16 17 20 23 21 19 18 12 22 model:multifunction warmer station model code:cda1003 r01.

  • Page 4

    Operation the unit is able to heat product from the top or the bottom and alternatively from the top and bottom simultaneously with the halogen display lamp on permanently. 1. The unit is switched on via the ‘mains switch’(1). This switches on the halogen display light. 2. Once the ‘mains switch’ is...

  • Page 5

    Operating tips 1. Carving station when the unit is used as a carving station we recommend that the user adds approximately 20-25mm of water into the gastronorm insert. This will ensure that the product does not dry out if left for extensive periods of time additionally avoid using the top element as...

  • Page 6: Warning

    Cleaning 1. Always ensure that the unit is disconnected from the main power supply before cleaning. 2. This unit should not be cleaned with a water jet or immersed in water. Use only a damp cloth or sponge dipped in soapy water. 3. Wipe off the unit with a dry cloth and wait at least a half an hour ...