Anvil CDA1003 R01 Installation Operation And Care - page 4
OPERATION
The unit is able to heat product from the top or the bottom and
alternatively from the top and bottom simultaneously with the
halogen display lamp on permanently.
1. The unit is switched on via the ‘mains switch’(1).
This switches on the halogen display light.
2. Once the ‘mains switch’ is switched on the user can chose to
activate either the top and/or bottom elements depending on
the type of heating required.
3. The top element is energized via the illuminated rocker
switch (2) shown in the diagram below.
4. The bottom element is energized with the energy regulator knob
marked 0-6 (3)and set to the desired temperature. Note that in
position 6 the element will remain energized continuously.
CONTROL PANEL LAYOUT
ENERGY REGULATOR CONTROL
KNOB (3)
MAIN SWITCH (1)
INDICATOR LAMP
ILLUMINATED ROCKER
SWITCH (2)
TOP ELEMENT
ELECTRICAL CONNECTION INFORMATION
MODEL
DESCRIPTION
VOLTS
(V /Hz)
POWER
(W)
CDA1003 R01
MULTIFUNCTION
WARMER STATION
230/50
1900
230V
E1
E
N
L
L
S2
E2
H1
ER
S2
2
4
S1
S1
P2
P1
LEGEND
DESCRIPTION
PART NUMBER
S1
NON ULLUMINATED ROCKER SWITCH
1-RS-NI
S2
ROCKER SWITCH
1-NRS-BMA4002
L
HALOGEN OVEN LAMP
1-LB-CGA0016
ER
ENERGY REGULATOR
1-ER-URS0012
E1
TOP ELEMENT
5-1000W-CD
E2
BOTTOM ELEMENT
5-1000W-CDA1003
H1
PILOT LIGHT
1-PL-BMA0001
WIRING DIAGRAM
MODEL CODE: CDA1003 R01
MODEL: MULIFUNCTION WARMER