Audio Analogue Crescendo Owner's Manual - page 7
7
MENU
SLEEP TIMER OFF
When you are in the menu you can use the ▲(2) and ▼(8) switch on the
remote to set the SLEEP mode or exit the menu. Use the OK(5) switch on the
remote to confirm what you have set.
When you are in the SLEEP TIMER voice of the menu use ◄(4) and ►
(6)
on
the remote to
select the desired set time: OFF or 15, 30, 45, 60 minutes.
In such way the unit even if it’s playing will enter in stand by mode after the set
time has passed and will also turn off the unit connected to the Trigger Out
output.
MENU
EXIT
MENU
SLEEP TIMER 60
MENU
SLEEP ENABLE
Description of the remote controller: CD PLAYER Functions
•
PLAY / PAUSE
•
STOP / OPEN
•
PREV / REW
•
NEXT / FFW
•
0123456789 (NUMERIC KEYS): According to the functioning state of the CD
player you have two different actions:
-
when the CD player is in stop it is possible to select a track pressing the
number of the correspondent song (the unit waits for PLAY to be pressed).
-
When the CD player is playing, pressing the number of the desired song it
immediately skips to the indicated track.
•
STANDBY CD: it switches-on and switches-off the unit.
•
RPT (REPEAT) This key has different functions according to the functioning
state of the CD player:
When the CD player is stopped it is possible to choose to repeat
a track or the entire disc by pressing the key once or twice. To
choose to repeat a track you press the keys PREV and NEXT to
select the track to repeat or select the track directly by its
number using the numeric keys on the remote.
When the CD player is playing, pressing this key in two different
moments determines the initial instant (A) and final (B) of an
arbitrary section to repeat. When this option is active, you can
de-activate it by pressing the key again, and the normal playback
of the CD is re-established.
SHUFFLE function, this playing mode is enabled with the unit in
STOP state and permits random playback of the tracks. While
playing you can randomly change the played track with the
switches NEXT and PREV on the front panel or on the remote
while you can reproduce an established track using the numeric
keys on the remote.
•
TIME/Menu: the switch has two different functions: if it is pressed while the unit
is playing it activates the Time one, while if is pressed and keep pressed for
about one second when the unit is in stop mode it let you enter into the setup
menu.
Time function: pressing the switch when the unit is playing permits to visualize
different information on the reproducing time. The alternative modalities are:
-
the time that is left until the end of the song, modality “end of track” ( on the
display it appears in “_” between the indication of the minutes and the
seconds).
-
The time that is left until the end of the CD, modality “end of disc” (on the
display it appears in “-“ between the indication of the minutes and the
seconds).
-
The time that has gone by since the beginning of the CD, modality “total
time” (on the display it appears in “.“ between the indication of the minutes
and the seconds).
Menu function: to enter into the menu the unit must be in stop mode. Once this is done, press the Time switch and keep it pressed
for about a second. .
The SLEEP function when enabled permits you to automatically drive the unit in standby mode after a determined settable time