- DL manuals
- Audio Technica
- Headphone
- ATH-ANC700BT
- User Manual
Audio Technica ATH-ANC700BT User Manual
Summary of ATH-ANC700BT
Page 1
Ath-anc700bt user manual wireless noise-cancelling headphones.
Page 2: Introduction
1 thank you for purchasing this audio-technica product. Before using the product, please read through the quick start guide and caution guide, as well as this user manual when necessary, to ensure that you use the product correctly. Although this product was designed to be used safely, failing to us...
Page 3: Safety Precautions
2 the product is equipped with a rechargeable battery (lithium polymer battery). Safety precautions • if battery fluid gets into eyes, do not rub them. Rinse thoroughly with clean water such as tap water and consult a doctor immediately. • if battery fluid leaks, do not touch fluid with bare hands. ...
Page 4: Notes On Use
3 notes on use • be sure to read the connected device’s user manual before use. • audio-technica will not be liable in any way for any loss of data in the unlikely event that such losses should occur while using the product. • on public transportation or in other public places, keep the volume low s...
Page 5
4 the product is designed to use its built-in microphone to pick up noise from the surrounding environment (noise from vehicles, noise from air conditioners, etc.) and to cancel out that noise by producing sounds in negative phase. This results in a reduction in the sounds in your environment. • the...
Page 6: Part Names and Functions
5 part names and functions accessories • cable (1.2 m (3.9’) / 3.5 mm (1/8“) gold-plated stereo mini-plug)* • usb charging cable (30 cm (12“)) • pouch * the diameter is 2.5 mm (3/32“) on the straight plug side and 3.5 mm (1/8“) on the l-shaped plug side. L/r (left/right) indicator slider arm joint h...
Page 7: Charging The Battery
6 charging the battery • fully charge the battery when using it for the first time. • when the rechargeable battery is running low, the product will sound 2 sets of 2 beeps through the headphones, and the multi-indicator lamp will flash in red. When these beeps sound, charge the battery. • it takes ...
Page 8: Connecting Via Bluetooth
7 connecting via bluetooth wireless technology about pairing pairing a bluetooth device to connect the product to a bluetooth device, the product needs to pair (register) with the device. Once they are paired, you do not need to pair them again. However, you need to pair again in the following cases...
Page 9: Using The Product
8 using the product the product can use bluetooth wireless technology to connect to your device and play music, receive phone calls, etc. Use the product for whichever of these purposes suits your needs. Note that audio-technica cannot guarantee the operation of displays, such as the battery level d...
Page 10: Using The Product
9 using the product you can fold the housing so that it lies flat. After folding it flat, you can also fold the housing inside the headband. • the swivel mechanism cannot rotate more than 90 degrees. Do not apply excessive force to this mechanism. Using the joint as a fulcrum, the housing can be fol...
Page 11: Using The Product
10 using the product listening to audio • to connect for the first time, pair the product and your device via bluetooth wireless technology. Once they are paired, turn on the bluetooth device’s bluetooth connection, and then turn on the product. • use your bluetooth device to start playback, referri...
Page 12: Using The Product
11 using the product talking on the phone • if your bluetooth device supports telephone features, you can use this product to talk on the phone. • when your bluetooth device receives a phone call, the product’s ringtone sounds. • if a call is received while you are listening to music, music playback...
Page 13: Using The Product
12 using the product reset function if the product does not work or other malfunctions occur, refer to “charging the battery” (p. 6) and connect the usb charging cable. Make sure the cable is carrying power. Disconnecting and then reconnecting the included usb charging cable will reset the product a...
Page 14: Cleaning
13 cleaning get into the habit of regularly cleaning the product to ensure that it lasts for a long time. Do not use alcohol, paint thinners or other solvents for cleaning purposes. • to clean the product, wipe it with a dry cloth. • wipe away perspiration or any other dirt from the cable with a dry...
Page 15: Troubleshooting
14 troubleshooting problem solution power is not supplied • charge the product. Unable to pair • confirm that the bluetooth device communicates using ver. 2.1+edr or higher. • place the product and the bluetooth device within 1 m (3.3’) of each other. • set the profiles for the bluetooth device. For...
Page 16: Troubleshooting
15 troubleshooting when the connection codec is aac, significant sound delays can be alleviated by changing the connection codec to sbc, which comes standard with bluetooth devices.* 1 connecting to an sbc priority connection when the pairing with a bluetooth device has been completed 1. Turn on the...
Page 17: Multi-Indicator Lamp Display
16 multi-indicator lamp display the indicator lamp of the product indicates the product’s status as explained below. Status multi-indicator lamp display pattern red white pairing searching for device flashing in intervals of 0.5 seconds searching for device (when using an sbc priority connection) fl...
Page 18: Specifications
17 headphones type active noise-cancelling driver 40 mm sensitivity 98 db/mw (when noise-cancellation used)* 1 95 db/mw (when noise-cancellation not used)* 1 maximum input power 1,000 mw* 1 frequency response 5 to 40,000 hz impedance 150 ohms (when noise-cancellation used)* 1 35 ohms (when noise-can...
Page 19
Ver.1 2018.2.28 132313670-02-01 audio-technica corporation 2-46-1 nishi-naruse, machida, tokyo 194-8666, japan ©2018 audio-technica corporation global support contact: www.At-globalsupport.Com.