Audio Technica ATH-ANC700BT User Manual - Using The Product
11
Using the product
Talking on the phone
• If your Bluetooth device supports telephone features, you can use this product to talk on the phone.
• When your Bluetooth device receives a phone call, the product’s ringtone sounds.
• If a call is received while you are listening to music, music playback is paused. When you finish the call, music
playback resumes.*
1
When
Operating position
Operation
Function
Receiving
a call
Touch
Answers the call.
Touch and hold (for
about 2 seconds)
Rejects the call.
Talking on
the phone
Touch
Ends the call.
Touch and hold (for
about 2 seconds)
Each time you touch and hold here (about 2
seconds), you switch the call to your mobile
phone or to the product.
*2
Touch
Increases the phone volume by 1 level.
Decreases the phone volume by 1 level.
*1 Depending on your Bluetooth device, music playback may not resume.
*2 When you hear a confirmation tone, release your finger from the touch panel.
• The phone call operations above may not be available on some smartphones.
Using the noise-cancelling function
The built-in microphones pick up the noise around you, allowing the product to produce a sound-cancelling signal to
effectively reduce the noise.
The noise-cancelling function turns on automatically when you turn on the
power to the product.
You can turn the noise-cancelling function on or off by covering the 3 points on
the touch panel with your palm as shown in the figure.
• When using the noise-cancelling function, the noise-cancelling indicator lamp
lights as shown below.
Lit in green: noise-cancelling function is on
Unlit: noise-cancelling function is off
• There is a difference in volume depending on whether the noise-cancelling
function is on or off.