B&B Electronics EIDM-EXTEND-2 User Manual - page 6
EIDM-EXTEND-2 Long Range Ethernet Extender
5
6. Front Panel LED Indicators
There are 8 LED indicators on the front panel of the Long Range Ethernet Extender
displaying the current status. These LED indicators are described as following.
POWER:
“Green On” shows Ethernet Extender power supply is normal.
TEST : “Yellow On” shows Ethernet Extender is self testing after powered on.
LOOP1 :
“Green Flash” shows SHDSL connection is in progress.
:“Green On” shows SHDSL loop1 connects successfully.
LOOP2 : “Green Flash” shows SHDSL connection is in progress.
:
“Green On” shows SHDSL loop2 connects successfully.
LAN1 : “Green On” shows LAN1 port is in connection.
: “Green Flash” shows data activity on LAN1 port.
100 : “Green On” shows LAN1 Ethernet connection is at 100Mbps.
LAN2 : “Green On” shows LAN2 port is in connection.
:“Green Flash” shows data activity on LAN2 port.
100 :
“Green On” shows LAN2 Ethernet connection is at 100Mbps.