B&G h1000 pilot User Manual - H1000 Pilot
h1000 pilot
main menu
Page 13
memories menu
Compass
The compass memory allows a pre-set heading to be defined and any deviation from that course
will be shown as an error on the Tactical Compass page. This course can be updated by one of
three methods. The first method, is simply by pressing the
ENTER
key whilst the display is showing
the Tactical Compass page. The second is by using the drop down box in the
Memories
→
Compass
→
Course
, drop down menu. The drop down box offers
Use heading
which sets the
course to the heading the boat is presently steering to and
User defined
which allows a pre-set
value to be entered.
PORT and STBD courses (sailboats only) are retained and updated at each press of the
ENTER
key
whilst in the Tactical Compass page. When
OK
is selected, control returns to the
Memories Menu
.
reset trip log
(this function is only available if a speed input is present)
Reset trip log clears the trip log value back to zero. The stored log however is unaffected by this
operation. Pressing the
UP/DOWN
key toggles between
OK
and
Cancel
.
alarms
Alarm levels for various measured functions can be set, or inhibited. All the alarms default to
OFF
on a factory reset.
If available on the system, the
Wind speed
,
Shallow depth
, and
Off course
alarms can be set from
the
Alarms
menu. Selecting
Pilot
activates the Pilot Alarms screen where the
Watch timer
and
Pilot off course
alarms can be set.
It should be noted that two
Off course
alarms are available with the
h1000 Pilot system. The first,
which is located directly on the
Alarms
menu, is triggered from the
Tactical Compass
page. The
second Off course alarm, located within the
Pilot Alarms
menu triggers only when the Pilot
deviates from the Pilot Set Course.