B&G h1000 pilot User Manual - H1000 Pilot
h1000 pilot
mob procedure
Page 23
mob procedure
mob manual recovery: for all boats, pilot off
1. Press
the
MOB
key as soon as the person is lost overboard.
2.
All digital displays will flash the
MOB Alarm Message
and the alarm will sound (if connected).
3.
Pressing any key on the
h1000 Pilot display silences the
MOB
alarm. This action clears the
alarm screen and the display now shows the bearing and distance to where the incident
occurred. The bearing and distance to the casualty are shown under the title “
Steer
” on the
right hand side of the LCD.
4.
The boat should now be manually steered back to where the incident occurred by following the
bearing and distance shown on the Pilot display.
5.
Recover the person(s).
6.
The MOB feature can be disabled, by pressing and holding down the
MOB
key for five seconds
until the display clears. The Pilot will now default to
OFF Compass Mode
.
mob manual recovery: for all boats, pilot on
1. Press
the
MOB
key as soon as the person is lost overboard.
2.
All digital displays will flash the
MOB Alarm Message
and the alarm will sound (if connected).
3.
Pressing any key on the
h1000 Pilot display silences the
MOB
alarm. This action clears the
alarm screen and the display now shows the bearing and distance to where the incident
occurred. The bearing and distance to the casualty are shown under the title “
Steer
” on the
right hand side of the LCD.
4.
The boat should now be manually steered under autopilot control back to where the incident
occurred. This is done with the use of the
-10
°
,
+10
°
keys (display or hand-held) and the
rotary
knob
and following the on-screen bearing and distance to where the incident occurred.
5.
Recover the person(s).
6.
The MOB feature can be disabled, by pressing and holding down the
MOB
key for five seconds
until the display clears. The Pilot will now default to
OFF Compass Mode
.