B2 Audio M1 Owner's Manual - page 7
of
10
8 ohm
~ 2ohms
3.3 DAISY CHAIN CONNECTION
Daisy chain connection allows linking of 2 mono amplifiers to work as 1.
Step 1
. Connect the master amplifier to the head-unit and set its output master
Step 2
. Connect the master and slave amplifier in daisy chain Rca jack as shown in the diagram.
DAISY CHAIN CONNECTION DIAGRAM I
MASTER AMPLIFIER
HeadUnit
SLAVE AMPLIFIER
Please read the following connection diagram cautiously to ensure the correct connection.
and input slave switch to the output master position.
Step 3
. Set the slave amplifier output master & input slave switch to the slave input position.
7
SPEAKER CONNECTION DIAGRAM II