Read these instructions carefully before use and keep them for future reference. Your child’s safety may be affected if you do not follow these instructions. Www.Babyjogger.Com city mini gt assembly instructions this product complies with bs en 1888:2003 inc. A1,2,3: 2005.
2 • this stroller is suitable from birth to 15kg [33lb]. • this stroller is tested to 15kg [33lb] in accordance with bs en 1888:2003. • warning: it may be dangerous to leave your child unattended. • warning: watch out for cars – never assume that a driver can see you and your child. • warning: if yo...
1 • warning: taking children up or down stairs, steps, escalators, steep slopes and muddy/ rough terrain in a stroller could be dangerous and should not be attempted. Damage resulting to stroller will not be covered under warranty. Remove your child from the stroller and fold it up for easy carrying...
2 1 unpack stroller from box and set wheels aside. 3 turn stroller over to upright position. 2 begin to unfold stroller by pulling the auto-lock lever while pushing the handle up and away from the lower frame. The stroller will click into place. 4 snap red safety strap to frame under the fold mechan...
3 1 to install front wheel, lay stroller back so the handle is resting on floor. 2 attach the front wheel by sliding the axle into the wheel end until it clicks. Gently tug on wheel to make sure the front wheel is locked into place. Swivel/straight feature • press the lever down to allow the front w...
4 1 align wheel axle with wheel mount on stroller frame. 2 insert the wheel axle into the wheel mount until it clicks into place. Gently tug on wheel to make sure the rear wheel is properly attached. Rear wheels to install rear wheels: 1 press the wheel release button while gently sliding the wheel ...
5 2 to remove the canopy, stand facing the stroller and press the grey release button while pulling up on the canopy bracket. Repeat on opposite side to remove entire canopy from stroller. 1 to attach canopy to frame, simply slide canopy peg into the top hole of the universal mounting bracket, until...
6 6 brake to engage parking brake: gently pull brake lever into upright position until it clicks into place. To release parking brake: pinch gray tabs and pull towards you. Push brake lever down until it is parallel with the frame. Warning: engage parking device before loading and unloading passenge...
7 1 unclip top of shoulder strap from the seat and re-clip on the pair of seat loops closest to child’s shoulder height. 1 pull shoulder pads down close to main harness buckle. 2 hold the plastic guide and pull the strap end to tighten or pull the upper harness strap to loosen. 3 fasten both shoulde...
8 1 pinch the clamp behind the seat, and slide it down to desired recline. Pull seat down on both sides to match recline position of clamp.Reverse steps to return to the upright position. Weather cover: if desired, pull weather cover down and over the seat back mesh. Secure firmly over both sides of...
9 9 to remove the basket: 1 from the rear of the stroller: unsnap the top snaps of the basket from around the frame tubing above the middle crossbar. Unsnap the bottom snaps of the basket from around the frame tubing below the middle crossbar. 2 from the front of the stroller: unsnap lower seat fabr...
10 10 removing the seat: 4 loosen fold strap rings and unhook from fold mechanism. 1 remove the canopy. 3 unfasten seat straps from around the bottom/back of the frame, located behind the front wheel. 2 starting with the top snap closest to the handle and working your way down the entire frame, unsn...
11 11 1 remove child from seat. Unsnap red safety straps from frame. Pull upwards on the "pull to fold" strap with a gentle tug and your stroller will fold in half. Simple lift & fold (patented) quick fold technology.
12 12 to preserve the longevity of your stroller, it is important to perform simple, regular maintenance. From time to time, make sure that the joints and folding areas are still in good condition. If you hear any squeaking or feel tension, you can take your stroller to a local bike shop for added l...
13 13 baby jogger's limited lifetime warranty: • baby jogger warrants that the frame is free of manufacturer defects for the lifetime of the product. Manufacturer’s defects include but are not limited to the breaking of welds and frame tube damage. • textile or soft side materials and all other comp...
14 imported by kooltrade ltd. M34 3qa customerservice@kooltrade.Co.Uk • 0161 335 2508 the baby jogger company: 8575 magellan parkway, suite 1000 • richmond, va 23227 usa • www.Babyjogger.Com.
