Baby Lock Audrey BL67 Manual - Using The Needle Threader
Other manuals for Audrey BL67:
Instruction And Reference Manual
Manual is about: A-Line Series
of
12
Using the needle Threader
1. Lower the presser foot.
2. Set needle in up position.
3. Lower the threader slowly and draw thread through thread guide (A) and pull toward the right.
4. Lower the lever as far as it will go. The threader will turn and the hook pin will go through the needle eye.
5. Position thread below the needle eye and under the hook pin.
6. Hold thread loosely and slowly return lever to original position. Hook will turn and pass thread through
needle eye while making a loop of thread.
7. Raise presser foot and pull thread out about 10 inches from needle eye.
Note: The needle threader can only be used for needle sizes 11, 14 and 16.
2
1
A
3
5
6
7
4