Baby Lock Audrey BL67 Manual - Starting to Sew
Starting to Sew
The machine will be set at 01 automatically to sew straight stitches when the power switch is turned on.
1. Raise the presser foot.
2. Place the fabric under the presser foot.
3. Lower the presser foot.
4. Hold both threads to the back when starting to sew. Let the threads go after sewing a few stitches.
5. While sewing, regulate the speed with the sliding speed control lever or foot control.
6. Stop the machine when you reach the end of the seam.
7. Raise the presser foot lever.
8. When you have reached the end of a seam, stop sewing and turn the handwheel toward you to bring the
needle to highest position. Raise the presser foot and pull the fabric out from under the foot to the back of
the machine. Cut the threads in the thread cutter on the left side of the machine.
1
2
3
7
5
4
6
7
8