Baby Lock Pro-Stitcher BLPS Instruction And Reference Manual - Installation

 Page 4

Installation

Baby Lock Crown Jewel 

Figure 1

Tools Required

Power drill 

4mm Allen wrench

5mm Allen wrench

Slotted screwdriver (one large and one small)

Phillips screwdriver (one large and one small)

Knife and/or scissors

X-Rack Installation

NOTE: Owners of the Majestic Frame should also 

have purchased a Pro-Stitcher shim kit (Item No. 

(BLPS-GMFKIT) for the Majestic Frame.  Please fol-

low instructions included in that kit for shimming 

the track prior to installing the X-rack.

1.

 Remove the blue fl exirack (Page 3, A) and the 

Pro-Stitcher carriage (E) from the box.  Cut the cable 

ties from the front of the carriage (Figure 1).

2.

 Place the Pro-Stitcher carriage on the frame with 

the white X-axis gear toward the front of the table.  

The white X-axis gear drives the carriage left/right 

across the table.

3.

 Starting at one end of the table, begin mount-

ing the blue fl exirack to the table surface. Using the 

X-axis engagement lever, drop the white X-axis gear 

so it engages with the blue fl exirack. With the blue 

fl exirack in position under the white gear, begin 

peeling the pink protective layer from the back side 

of the blue fl exirack and pressing down on the blue 

fl exirack to stick it to the table surface (Figure 2).

Figure 2