Baby Trend JG95 Instruction Manual - Piezas
PIEZAS
Copyright © 2015, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
14
13
Copyright © 2015, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
MAINTENANCE
CARE AND MAINTENANCE
TESTING FOR PROPER WHEEL INSTALLATION
WARNING:
ALWAYS
check the double nut locking
system before each use to
ensure that the front wheel is
securely fastened to the frame.
22)
• Lift the front wheel off of the ground and
sharply strike the top of the tire (Fig. 22).
The wheel should not be loose or come off.
If you experience front wheel wobble
that is beyond what is normal for use
while walking or jogging you may have
to adjust the front wheel housing nut.
23)
• Remove footrest to access nut. You can
use a standard crescent wrench to tighten
the nut (Fig. 23).
DO NOT OVER TIGHTEN this can cause
damage to the wheel housing.
FENDER
If adjustment or replacement is necessary:
24)
• Line up the front fender and press onto
the front frame assembly (Fig. 24a).
• Insert the 4 screws through the underside
of the front frame assembly into the front
fender’s plastic tubes. Tighten the screws
only until snug (Fig. 24b).
DO NOT OVER TIGHTEN.
SEAT PAD
• To clean the seat pad, use only mild
household soap or detergent and warm
water on a sponge or clean cloth.
OTHER
• Check your stroller for loose screws, worn
parts, torn material or stitching on a regular
basis. Replace or repair parts as needed.
Fig. 24b
Fig. 22
Fig. 23
Fig. 24a
Ruedas traseras
Rueda delantera
Carrito
Bandeja para niños
Portavasos
Tuerca del Eje
Placa de retención
Verifique que tenga todas las piezas para este modelo
antes de montar el carrito.