BaByliss 2990U User Manual - Helpful Hints And Tips
9) To release the section, move the switch back to the ‘I’ or ‘II’ setting
and then press and hold the opposite rotation button to unwind the
hair section.
10) Repeat as necessary.
11) After use, switch off and unplug the appliance.
12) Allow to cool before storing away.
13) Place the protective shield over the brush head to protect the
bristles. Please see the ‘Bristle Protection Shields’ section for
direction.
Helpful Hints and tips
• To define layers and add shape to the ends of the hair, follow steps
5 - 6 and repeat through the sections.
• To get root volume and body through the top section of hair, follow
steps 7 - 9 using an upward motion.
CLeANING & MAINteNANCe
To help keep your appliance in the best possible condition follow the
steps below:
General
• Do not wrap the lead around the appliance, instead coil the lead
loosely by the side when storing away.
• Do not use the appliance at a stretch from the power point.
• Always unplug after use.
Cleaning the Filter
• Unplug the appliance and let it cool completely before cleaning.
• Holding the handle of the appliance firmly pull the top of the rear filter
towards you, this will enable the rear filter to open.
• Using a soft brush, clean any hair and other debris from the filter.
• Replace the rear filter by pushing back into position.
• To clean the outside of the appliance, wipe with a damp cloth. Make
sure no water enters the appliance and it is completely dry before
use.