BabyLove EZY GROW EP Instruction Book - page 17
32
33
ACCESSORIES & FEATURES
ACCESSORIES & FEATURES
TO REPLACE COVER
To replace cover refit in reverse sequence G to A.
ONLY USE BABYLOVE SEAT COVERS THAT ARE DESIGNED AND TESTED FOR USE WITH THIS
PRODUCT.
VERY IMPORTANT:
Only replace the cover with Nursery Elegance supplied
replacement cover with identical shoulder height
markers or a replacement cover meeting AS/NZS 8005.
TO CLEAN THE COVER
The restraint has a flame retardant cover which is removable for cleaning. Cleaning instructions are on
the care label attached to the cover. When washing cover engage hook & loop strips together to eliminate
other garments being caught. Ensure to keep strips free of lint to work effectively.
The cover has been designed to protect your child when seated in the restraint. Care should be taken if
children either eat or drink while in the restraint as some food or drink products may cause damage or
marking to the cover. Wash or clean immediately.
Do not pull sticky items from covers as the cover may be damaged - soak in water and gently remove.
IMPORTANT:
Do not pull sticky items from covers as the cover may be damaged - soak in water and gently remove.
TO REMOVE COVER
Remove any accessories eg: padded insert, shoulder pads before removing cover.
Follow the sequence below A to G to remove the cover.
D. Unhook elastic loops.
G. Peel cover away from seat.
A. Disengage harness tongues from crotch buckle.
C. Peel elastic
cover away
from headrest.
B. Unhook the strap connector
from the back of the restraint and
feed the shoulder harness straps
through the headrest slots and
cover, (If applicable).
F. Feed crotch
buckle and
harness
adjustment
strap through
slot in cover,
(If applicable).
E. Unhook Elastic Loops
from under the restraint
Strap Connector