BackYardCity Pool Bermuda Assembly & Installation - Buttress-Free
STEP 15 – WALL FRAME INSTALLATION:
STEP 16- FRAME INSTALLATION-LINER COMPONENTS:
Once you have enough pool wall slats assembled, you should install a second upright, beaded track receiver, metal
top channel, secure top plate and top rail. The top track does not attach to the top plate. It is just placed on top of the
beaded track receiver between each set of uprights. The top rail will hold everything down and in place. Continue
this process around the pool.
Upright
#10
Screw
Bottom
Plate
#10
Screw
Fastening uprights will require one, two, or three #10x ½” screws
for each upright, depending on which model pool you have.
The top plates remain unsecured for now, but they should be
temporarily clipped over the wall to prevent the uprights from falling backward.
Check pool for roundness again, making sure the diameter is the same in all directions.
Install a pool upright as shown in Fig 50. The upright attaches at the bottom to the bottom plate. On the top of the
pool wall, install the plastic beaded track receiver as shown in Step 16.
Buttress-Free
Traditional Buttress
Fig. 51
Fig. 52
Fig. 50
Fig. 53