Bak thermoplastic welding technology ltd 1 operating instructions overlap welding machine type planon / roofon this operating manual must be available to the operating personnel at all times. Read the operating instructions carefully before use and keep for further reference. Application the planon ...
Bak thermoplastic welding technology ltd 2 security warning danger of life when opening the tool as live components and connections are exposed. Unplug the tool before opening it. • danger of fire and explosion in case of incorrect use of the welding machine especially near combustible materials. Ne...
Bak thermoplastic welding technology ltd 3 • the machine must not be used on inflammable subsurface (e.G. Housetops and floors made of wood) • the tool must be protected from damp and wet because of its protection mark ip20. • when using the machine on roofs and tables it could fall down because of ...
Bak thermoplastic welding technology ltd 4 security advice the following warning symbols show the existent risks: risk of crushing risk of burns the operator is responsible for the compliance of the safety related standards. Before starting up of the machine the operator must be instructed about the...
Bak thermoplastic welding technology ltd 5 adjustments before the welding basic adjustment: perform adjustments only in cold condition (danger of burns!). Nozzle adjustment: • loosen the screws on the bracket to change adjustments on the nozzle. See below drawings for the recommended adjustments. Gu...
Bak thermoplastic welding technology ltd 6 according to the geomembrane liner or film and climatic influence, adjust the welding speed using the potentiometer. Welding pressure: the self-weight of the machine transfers the welding pressure directly onto the pressure roller. Tool description 1 main s...
Bak thermoplastic welding technology ltd 7 • guide the welding machine along the overlapping. Always watch the position of the guide roller. • after welding lower and raise the hot air tool. • turn off the heating with the switch on the hot air tool and allow the welding nozzle to cool down. • switc...
Bak thermoplastic welding technology ltd 8 maintenance • clean the welding nozzle with a wire brush (5201330). • check if the mains cable and the plug are not electrically or mechanically damaged. Transport – handling – storing transport: the welding machine is packed appropriately and must be prote...
Bak thermoplastic welding technology ltd 10 spare parts drawings and lists framework and drive 5230021 5230059 5230039 5230020 5230038 5230177 5230014 5230012 5230116 5230124 5230160 5230161 5230060 5230062 5230061 5230096 5230019 5230082 5230040 5230025 5230022 5230064 5230047 5230013 5230043 52300...
Bak thermoplastic welding technology ltd 11 5230103 5230089 5230100 5230071 5230057 5230067 5230056 5102236 5230034 5230093 5230106 5230116 5230094 5230066 5230027 5230113 5230065 5230046 5230056 5230073 5230015 5230030 5230107 5230018 5230097 5230087 5230085 5230104 5230092 5230153 5230152 5230151 ...
Bak thermoplastic welding technology ltd 12 framework and drive art. No. Description art. No. Description 5102236 silicon rubber ring 20 - driving roller 5230060 sensing device 10a 5102503 silicon rubber ring 20 - pressure roller 5230061 potentiometer 10kΩ 5102504 silicon rubber ring 30 - pressure r...
Bak thermoplastic welding technology ltd 13 hot air tool type eron 6101760 5113269 5101270 6600615 6600616 6113695 6600638 6600612 6600637 6100287 6600614 6600636 6100284 6600613 6600605 6600607 6600608 6100268 6600611 6600609 6101243 6100263 6106186 6101242 6600603 6600601 6600602 6100444 5230171 a...
Bak thermoplastic welding technology ltd 14 ce/planon deutsch eg-konformitätserklärung herz-gmbh, a-6141 schönberg/austria, bestätigt, dass das nachfolgende produkt in der von uns in verkehr gebrachten ausführung die anforderung der folgenden richtlinie(n) erfüllt. Bezeichnung des gerätes : schweiss...
Bak thermoplastic welding technology ltd 15 lietivių atitikties deklaracija herz-gmbh, a-6141 schönberg/austria, mes patvirtiname, kad šio produkto modelis, paleistas į apyvartą , pilnutinai atitinka sekančias eb direktyvas. Įrankio aprašymas : suvirinimo įrenginia tipas : planon direktyvos : ems di...
Bak thermoplastic welding technology ltd 16 norsk deklaration av samsvarsmåling fra herz-gmbh, a-6141 schönberg, bekrefter at denne modellen av vårt solgte produkt oppfyller kravene i følgende ef- direktiver. Beskrivelse av verktøyet : sveiseapparat typ : planon direktivene : emc-direktivet 2004/108...
