Balance Meteo LED Weather Station User manual - page 9
How to display Max/Min temperature
Press the [MAX/MIN] button to display the memorized maximum indoor and
outdoor temperature on the channel displayed for 6 seconds.
Press this key again to display the memorized minimum indoor and outdoor
temperature on the channel displayed for 6 seconds.
While the maximum/minimum value on one channel is displayed, press the [CH]
button to display the maximum/minimum values on another channel.
When maximum/minimum value is displayed, press and hold the [MAX/MIN] for 2
seconds to clear the memorized max/min values in this channel and display the
current temperature.
Specifications
Main Unit (
275523
)
Displayed IN temperature range : -10°C to +60.0°C (14°F to 140.0°F)
Operating temperature range : 0°C to +50.0°C (32.0°F - 122.0°F)
Temperature resolution : 0.1°C (0.2°F)
Remote Temperature measurement
Displayed OUT temperature range : -20.0°C to +60.0°C (-4.0°F to 140.0°F)
Backup batteries : Use 2 pieces UM-4 AAA size 1.5V battery
.
Remote Unit
Displayed temperature range : -20.0°C to +60.0°C (-4.0°F to 140.0°F)
Operating temperature range : -10.0°C to +50.0°C (14.0°F to 122.0°F)
Temperature resolution : 0.1°C (0.2°F)
RF Transmission Frequency : 433 MHz
RF Transmission Range :
30
meters in open area
Temperature sensing cycle : 60 - 75 seconds
Batteries: 2 pieces of UM-4 AA size 1.5V battery
Caution:
Under severe radio frequency interference, the unit may not establish or maintain
communication link in this condition. It will return to normal state until the RF interference
does not exist.
Verwijderd:
A