1. DL manuals
  2. Balt
  3. Indoor Furnishing
  4. 89855 Champ
  5. Assembly Instructions Manual

Balt 89855 Champ Assembly Instructions Manual

Manual is about: AV/Presentation stand

Summary of 89855 Champ

  • Page 1

    1 assembly instructions 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567...

  • Page 2: #89855 Champ

    2 p-1 wood base 1 ea p-2 large door frame-tall 1 ea p-3 large door frame-short 1 ea p-4 side panel 1 ea p-5 side door frame 1 ea p-6 top platform-drilled 1 ea p-7 sliding shelf 1 ea p-8 removable shelf 2 ea p-9 lower front trim 1 ea p-10 upper side trim 2 ea p-11 upper front trim 1 ea a socket screw...

  • Page 3: #89855 Champ

    3 p-12 left shelf slide 1 ea p-13 right shelf slide 1 ea p-14 slide support 2 ea p-15 folding shelf bracket 2 ea p-16 side shelf 1 ea p-17 metal base 1 ea k lock ring 4 ea l lock washer 4 ea m lock hex 4 ea n key 8 ea r grommet sleeve 4 ea s grommet cap 4 ea t allen wrench 1 ea part drawing descript...

  • Page 4

    4 champ assembly diagram to assemble: i dentify and separate all the parts and hardware. Illustration # 1 e p-2 1. 2. 3. Read through assembly instruction from beginning to end before starting to assemble product. Place the large door frame tall (p-2) with the predrilled holes facing up and install ...

  • Page 5: 1-800-749-2258

    5 place the side door frame (p-5) with the predrilled holes facing up and install 1 right shelf slide (p-13) using 3 screws (a3) as shown in illustration # 3. Insert 1 each lock cylinder(g) through the lock plate (j) and the hole in the side door frame (p-5). Secure lock cylinder (g) using the lock ...

  • Page 6

    6 illustration # 5 place the top platform drilled (p-6) with the holes facing up. Attach 3 each magnetic door catches (b) to top platform drilled (p-6) using 12 each short screws (a6) as shown in illustration # 5. Illustration # 6 slide thetop platform drilled (p-6) over the 2 dowels (e) in the larg...

  • Page 7

    7 illustration # 7 p-3 secure the large door frame short (p-3) using 4 screws (a5) as shown in illustration # 7. 17. P-5 slide the 6 dowels (e) in the large door frame short (p-3) into the holes in the top platform drilled (p-6), the side door frame (p-5), and the side panel (p-4) as shown in illust...

  • Page 8

    8 20. 22. A4 p-17 attach 1 upper front trim (p-11) to the sliding shelf (p-7) using 2 screws (a) and 1 dowel (e) as shown in illustration #10. Attach 2 upper side trim (p-10) to the sliding shelf (p-7) using 4 each screws (a) and 2 dowels(e) as shown in illustration #10. D e a a e (do not tighten un...

  • Page 9

    9 insert 1 each lock cylinder(g) through the lock plate (j) and the hole in the large door frame tall (p-2) as shown in illustration #12. Secure lock cylinder (g) using the lock washer (l) and the lock hex (m). (f inger t ighten o nly .) slide lock ring (k) and lock retainer (h) over the square end ...

  • Page 10

    10 insert 8 shelf support pins (f) in the side panel (p-4) & the side door frame (p-5) at desired shelf heights as shown in illustration #13. Be sure that flat surface of pin is facing up. To install grommet, separate parts and press grommet sleeve (r) in round opening in the base (p1) as shown in i...

  • Page 11

    11 angle removable shelves (p-8) slightly, and slide them through one of the large doors. Two shelves should sit on the flat side of 8 shelf support pins (f) as shown in illustration #16. P-8 f p-8 36. Illustration # 15 place removable shelf (p-8) on flat surface. To install grommet separate parts a...