Balt 89855 Champ Assembly Instructions Manual - page 4
4
Champ
Assembly Diagram
To Assemble:
I
dentify and Separate all the Parts and Hardware.
Illustration # 1
E
P-2
1.
2.
3.
Read through assembly instruction from beginning
to end before starting to assemble product.
Place the Large Door Frame Tall
(P-2) with the Predrilled holes
facing up and install 6 Wood
Dowels (E) into the drilled holes as
shown in illustration # 1.
E
Insert 1 each Lock Cylinder(G)
through the Lock Plate (J) and the
hole in the Large Tall Door Frame (P-2).
Secure Lock Cylinder (G) using the Lock
Washer (L) and the Lock Hex (M).
(F
INGER
T
IGHTEN
O
NLY
.)
Slide Lock Ring (K) and Lock Retainer (H) over the square end
of Lock Cylinder (G). Secure using the ¼” Phil Head Lock Screw (A2).
Before tightening the Lock Hex (P), Insert the Key (N) and turn lock. Be sure that Lock Retainer (K)
Turns 90 degrees and rotates behind door frame as shown in Lock Details A & B(See page #3).
(T
IGHTEN
L
OCK
H
EX
(M)).
Place the Large Door Frame Short (P-3) with
the Predrilled holes facing up and install 6
Wood Dowels (E) into the drilled holes as shown
in illustration # 2.
Repeat Steps 2 and 3 to attach other door lock.
Be sure that Lock Retainer (K) Turns 90 degrees
and rotates behind door frame as shown in Lock
Details A & B(See page #3).
(T
IGHTEN
L
OCK
H
EX
(M)).
A2
K
M
L
G
J
H
Illustration # 2
4.
5.
Caution:
When moving Door Frames,
Hold frame and door together so hinges
are not Damaged!
E
P-3