Bang & Olufsen BeoLab 4000 User Manual - page 9
Manual is about: Bang & Olufsen BeoLab 4000: User Guide
of
12
9
D
D
B
Top-view of the BeoLab 4000
and the bracket (B).
Light partition walls
If you intend to hang the Beo-
Lab 4000 on a gypsum wall, the
wall bracket must be fastened
to a vertical stud.
If mounted in a vertical posi-
tion, two screws through the
holes (E) will suffice. The screws
must be lag screws.
If mounted in a horizontal
position, you must use three
screws. Two screws of a type
for gypsum panels through the
holes (E), and one lag screw
through the centre hole of the
bracket.